Ready-Mixed Concrete Volume, Coverage & Mix (BOM) Optimizer
Calculate required concrete volume in cubic meters (m³), surface coverage, and raw material recipe (cement, sand, aggregate, water).
Formula
Concrete Volume (m³) = Length (m) × Width (m) × [Thickness (cm) / 100] × (1 + Waste %)
Source / method note
Based on EN 206 / TS 500 standards and typical concrete volumetric density of 2.4 t/m³.
Legal / official rate note
This tool is for estimation and site planning. Structural calculations must be approved by a licensed civil engineer.
Frequently Asked Questions
How much area does 1 cubic meter (m³) of concrete cover?
1 m³ covers 10 m² at 10 cm thickness, 6.6 m² at 15 cm thickness, and 5 m² at 20 cm thickness.
